Code This error message can also appear if the BIOS did not allocate enough resources to the device. Use Device Manager to determine the source of and to resolve the conflict. For more information about how to resolve device conflicts, see the Help information about how to use Device Manager. This error message can also appear if the BIOS did not allocate sufficient resources to a device.
On the device property sheet that appears, click Troubleshoot to start the hardware troubleshooter for the device. This error message can also appear if the BIOS did notallocate sufficient resources to a device. To restart your computer now, click Restart Computer. Restart your computer. From Start, click Shut Down , and then select Restart.
To specify additional resources for this device, click the Resources tab and fill in the missing settings. Check your hardware documentation to find out what settings to use. The device is only partly configured and might need additional manual configuration of the resources the device requires.
The following steps might only work if the device is a Plug and Play device. If the device is not Plug and Play, you can refer to the device documentation or contact the device manufacturer for more information.
From Start, search for device manager and select Device Manager from the results. In the Resource Settings list, check to see if there is a question mark next to a resource. If so, select that resource, and assign it to the device. If a resource cannot be changed, click Change Settings. If Change Settings is unavailable, try to clear the Use automatic settings check box to make it available. Reinstall the device driver using the Hardware Update wizard. On the menu that appears, choose Update Driver to start the Hardware Update wizard.
Windows cannot start this hardware device because its configuration information in the registry is incomplete or damaged. This error can result if more than one service is defined for a device, there is a failure opening the service key, or the driver name cannot be obtained from the service key.
Revert to the most recent successful registry configuration. To roll a system back to the most recent successful configuration of the registry, you can restart the computer in Safe Mode and select the Last Known Good Configuration option, or if you've created a system restore point, you can try restoring to it.
Recovery options in Windows Back up and restore your PC Windows 8. What are the system recovery options in Windows? Windows 7. This error means that Windows is in the process of removing the device. However, the device has not yet been completely removed. This error code is temporary, and exists only during the attempts to query and then remove a device.
If that does not resolve the problem, restart your computer. This starts the Enable Device wizard. This device is not present, is not working properly, or does not have all its drivers installed. The device is installed incorrectly. The problem could be a hardware failure, or a new driver might be needed. Devices stay in this state if they have been prepared for removal.
After you remove the device, this error disappears. This device is disabled because the firmware of the device did not give it the required resources. Enable the device in the BIOS of the device. For information about how to make this change, see the hardware documentation or contact the manufacturer of your computer. This device is not working properly because Windows cannot load the drivers required for this device.
A driver service for this device has been disabled. An alternate driver may be providing this functionality. The translator that determines the kinds of resources that are required by the device has failed. Contact the device hardware vendor for more information about updating your BIOS and how to configure or replace the device.
Windows cannot determine the settings for this device. Consult the documentation that came with this device and use the Resource tab to set the configuration.
The device requires manual configuration. See the hardware documentation or contact the hardware vendor for instructions on manually configuring the device. After you configure the device itself, you can use the Resources tab in Device Manager to configure the resource settings in Windows.
Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update.
Please use the computer's system setup program to reconfigure the interrupt for this device. For more information about how to change BIOS settings, see the hardware documentation or contact the manufacturer of your computer. Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory.
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. Windows cannot access this hardware because its service key information in the registry is missing or recorded incorrectly.
Windows successfully loaded the device driver for this hardware but cannot find the hardware device. This problem occurs if you install a driver for a non-Plug and Play device, but Windows cannot find the device. Windows cannot load the device driver for this hardware because there is a duplicate device already running in the system.
A duplicate device was detected. This error occurs when a bus driver incorrectly creates two identically named sub-processes known as a bus driver error , or when a device with a serial number is discovered in a new location before it is removed from the old location.
One of the drivers controlling the device notified the operating system that the device failed in some manner.
If you have already tried the "Try these steps first" section, check the hardware documentation or contact the manufacturer for more information about diagnosing the problem. Currently, this hardware deviceis not connected to the computer. To fix this problem, reconnect this hardware device to the computer.
This error occurs if a device that was previously connected to the computer is no longer connected. To resolve this problem, reconnect this hardware device to the computer. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software.
Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct.
Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation. Details required : characters remaining Cancel Submit. I just uninstalled the display drivers i. Hi guys, I have a problem related to display drivers. This is dxdiag Guys, Please help me. I tried to do system restore. But there weren't any restore points.
This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. Getting started with a Blackmagic product? Ask questions here about setup and installation. Author Message. Fri Sep 23, pm Hello, I have installed the Desktop video v The device manager shows a 52 code error in the Decklink driver: Windows cannot verify the digital signature for the drivers required for this device.
Aditya Farrad Aditya is a self-motivated information technology professional and has been a technology writer for the last 7 years. Charles Stock March 12, at pm. Oscar March 22, at am. Aovin Mahmud August 18, at am. Method 4: Disable Driver Signature Enforcement worked for me thank you so much. Umar Aftab October 28, at pm.
Thanks for putting this together! Pavan Pandey November 17, at pm. Method 4 is working perfectly..
0コメント